10AX Ingot 2 Gang 2 Way Plate Switch
General Information
Dimensions 88mm (W) x 88mm (H) x 8mm (D)
Dimensions With Gasket 91mm (W) x 91mm (H) x 9mm (D)
Plate Design & Finish Victorian Satin Chrome
Insert & Gasket Colour White
Materials
Front Plate: Stainless
Steel Insert: Urea
Switch Cover: Stainless Steel
Rear Housing: Nylon
Terminals: Brass
Terminal Screws: Steel & Yellow Passivated
Contacts: Silver “on-lay” Copper / Brass
Internal Busbars: Formed Pressed Brass
Earth Strap: Mild Steel
Gasket: Nylon
Maximum Voltage 250V~ 50Hz
Load Rating 10AX (Suitable for Inductive Loads)
Plate Fixing Centres 60.3mm
Terminal Size 3.5mmø
Terminal Torque 0.5Nm
Terminal Capacity 4 x 1.5mm2 or 2 x 2.5mm2
Two Way Yes
Ingress Protection IP20
Back Box Depth 16mm Minimum
Termination Type Screw
Operational Temperature -5°C to +40°C
Warranty 10 Years
Standards
BS EN 60669-1:1999 +A1:2002 +A2:2008
Additional Information
Ensure that the mains supply is isolated before commencing installation and refer to the circuit diagram with the relevant product.
Bare earth cables must always be covered with appropriate sleeving and wired to the earth terminal.
Interchangeable with modules in the MiniGrid Range.
