2 Channel Multi Purpose Programmer
The CTC Controls range of programmers are a feature packed range, offering flexibility and reliability for use in any domestic heating and hot water installations.
The CTC EZIPROG 2 is a two channel multi purpose programmer, designed for separate control of your heating and stored hot water. The heating and hot water programmes are independent of each other, giving you the opportunity to operate the system in the most energy efficient and cost effective manner.
The blue back light on the programmer can be switched permanently on or off, depending on the user’s preference. When the back light is off, it can be lit at the push of a button and will then turn off again. The programmer can be configured for 24 hour, 5/2 day or 7 day operation, and has the flexibility of up to three on/off timings per day.
|2 channel programmer||EZIPROG 2|
|Independent time control channels||2|
|Power supply||230V AC, 50Hz|
|Operating temperature||0ºC to 35ºC|
|Total switch rating||230V AC, 6(2)A|
|Battery type||Lithium Cell CR2032|
|Plastics||Thermoplastic, flame retardant|
|Wiring||For fixed wiring only|
|Dimensions||140mm x 87mm x 37mm|
|Clock||12 hour am/pm, 1 minute resolution|
|BST/GMT time change||Automatic|
|Program cycle||24hr, 5/2 day or 7 day selectable|
|Program on/offs per day||2 on/offs, 3 on/offs selectable|
|Program selection||Auto, ON all day, ON constant, OFF|
|Program overide||Advance on/off|
|Program boost||+1, 2 or 3 hour option|
|Heating system||Pumped, gravity selectable|
|Complies with||EN60730-1, EN60730-2.7, EMC Directive 2004/108/EC, LVD Directive 2006/95/EC|