The store will not work correctly in the case when cookies are disabled.
QUICKTRONIC INTELLIGENT DIM T5 QTI 1X35/49
Quick Overview Product family benefits
- Same luminous flux with direct and alternating current
- Perfect lamp start for applications with motion sensors
- Dimming of amalgam lamps without flickering or reduced lifespan
- Very high efficiency thanks to cut-off technology
- Automatic restart after lamp replacement
- ECGs comply with MINERGIE standard due to very low standby consumption
- Configurable emergency power characteristics
TECHNICAL DATA
Input voltage AC | 198…264 V |
Nominal voltage | 220…240 V |
Mains frequency | 50/60 Hz |
Input voltage DC | 154…276 V |
Operating frequency | 44…120 kHz |
Max. ECG no. on circuit breaker 10 A (B) | 12 |
Max. ECG no. on circuit breaker 16 A (B) | 19 |
Inrush current | 28 A |
Â
LIGHT TECHNICAL DATA
Length | 360.0 mm |
Width | 30.0 mm |
Height | 21.0 mm |
Mounting hole spacing, length | 350.0 mm |
Product weight | 289.00 g |
Wire preparation length, input side | 8.0…9.0 mm |
Wire preparation length, output side | 8.0…9.0 mm |
Cable cross-section, output side | 0.5…1.5 / 0.5…1.0 mm² |
Cable cross-section, input side | 0.5…1.5 / 0.5…1.0 mm² |
Â
TEMPERATURES & OPERATING CONDITIONS
Ambient temperature range | +10…+50 °C |
Permitted rel. humidity during operation | 5…85 % |
Â
LIFESPAN
Dimming interface | 1…10 V |
Dimming range | 1…100 % |
Dimmable | Yes |
Overload protection | Automatic switch off, reversible |
Overheating protection | Power reduction and switch off at T > 75 °C at the tc point |
Suitable for emergency lighting | Yes |
Suitable for fixtures with prot. class | I |
End of lamp life safety shutdown | EOL T.2 |
Â
CERTIFICATES & STANDARDS
Approval marks – approval | VDE / VDE-EMC / EL / EAC / RCM / CCC |
Standards | Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547 |
EEI – Energy Label | A1 BAT |
Protection class | I |
Type of protection | IP20 |