The store will not work correctly in the case when cookies are disabled.
QTP-M 1X26W - 1X42W BALLAST
Quick Overview Product family benefits
- Long lamp life
- No adverse effect from frequent on/off switching
- Automatic restart after lamp replacement
- Perfect lamp start for applications with motion sensors
- Separate installations thanks to optional cable clamp for K2 and K3 casings
- VDE/VDE EMC certified system
TECHNICAL DATA
| Input voltage AC | 198…264 V |
| Line current | 0.20 A |
| Nominal voltage | 220…240 V |
| Mains frequency | 50…60 Hz |
| Input voltage DC | 176…276 V |
| Operating frequency | 47 kHz |
| Max. ECG no. on circuit breaker 10 A (B) | 17 |
| Max. ECG no. on circuit breaker 16 A (B) | 28 |
| Inrush current | 15 A |
Â
LIGHT TECHNICAL DATA
| Length | 103.0 mm |
| Width | 67.0 mm |
| Height | 31.0 mm |
| Mounting hole spacing, length | 94.0 mm |
| Product weight | 147.00 g |
| Cable cross-section, output side | 0.5…1.5 mm² |
| Cable cross-section, input side | 0.5…1.5 mm² |
Â
TEMPERATURES & OPERATING CONDITIONS
| Ambient temperature range | -20…+50 °C |
| Permitted rel. humidity during operation | 5…85 % |
Â
LIFESPAN
Â
ADDITIONAL PRODUCT DATA
| Product remark | Optional cable clamp, see chapter ECG mountings - cable clamp |
Â
CAPABILITIES
| Suitable for fixtures with prot. class | I / II |
| End of lamp life safety shutdown | EOL T.2 |
Â
CERTIFICATES & STANDARDS
| Approval marks – approval | VDE / VDE-EMC / ENEC 10 / GOST / RCM |
| EEI – Energy Label | A2 |
| Standards | Acc. to EN 61347-2-3/Acc. to EN 60929/Acc. to EN 55015:2006 + A1:2007/Acc. to EN 61000-3-2/Acc. to EN 61547 |
| Protection class | I/II |
| Type of protection | IP20 |
